Solar collectors "Made in Austria"
Solar panels for various applications
Sun Master, the leading manufacturer of solar collectors, offers its customers a wide selection of collectors with different designs. Innovation and research play an important role and ensure that our products are not only at the cutting edge of technology but, beyond that, also set new standards in the market. For this reason, all our solar collectors are subjected to continuous development, which maximizes both the quality of the collectors and the benefits for the user.
Solar collectors: quality at the highest level
Solar systems are sophisticated products that already provide a considerable amount of renewable energy. Nevertheless, Sun Master is constantly striving to improve its solar collectors and continues to set new standards. The results of these developments include new coatings and glazing types and improvements in storage, heat transfer, insulation and materials. Checked and certified by international inspection bodies, the thermal collectors of Sun Master are amongst the most modern and innovative solar collectors worldwide.
Convince yourself of the quality and design of our solar collectors. Get in touch with us and make an appointment without obligation.
Aluminum frame collector SLIM
Solar collector: the tried-and-tested on-roof collector
Thanks to its universal mounting potential, the aluminum frame collector SLIM offers easy on-roof installation. Optimum light transmission and the high efficiency of the solar panels ensure that the solar collector provides optimum performance.
Product features
- Super-thin design with low weight
- CMT welded frame for maximum loads
- Glass seal with optical adhesive seam/optional cover strip
- Serpentine meander with continuous welds
- Torsion-proof collector pipe
- Welded collector pipes
- Universal mounting system
- Tried-and-tested cutting ring fitting
- Protected glass edge
- Miter joints with continuous welds, frame with glass fully bonded for maximum rigidity
Technical parameters
| Model |
SLIM |
| Type |
flat plate collector (vertically) |
| Installation |
on-roof |
| Series |
SLIM25 |
| Gross area |
2.54 m² |
| Frame material |
aluminum |
| Frame design |
uncoated, alternatively anodized |
| Back plate |
aluminum clogged |
| Thermal insulation |
rock wool, 25 mm thick |
| Efficiency eta0 |
> 77.6% |
| Tilt angle min. |
20° |
| Tilt angle max. |
75° |
| Solar glass |
float / prismatic |
| Installation profile |
64 mm |
| Weight |
34 kg |
|
| Coating |
highly selective vacuum sputtering |
| Connections |
4 x side connections Cu 18 |
All solar collectors from Sun Master are characterized by continuous process improvement and the highest quality standards. For more information about our aluminum frame collectors, please contact us or arrange a no-obligation consultation.
Aluminum frame collector SSK
Solar collector: The state-of-the-art on-roof collector
The aluminum frame collector SSK is, thanks to its low weight, ideally suited both for in-roof and on-roof installation as well as for wall mounting. Optimum light transmission and the high efficiency of the solar panels ensure that the solar collector provides optimum performance.
Product features
- Miter joints with continuous welds, frame with glass fully bonded for optimal rigidity
- Highly transparent solar safety glass
- Quick and easy installation
- Cover strips available in different colors
- Collectors can be connected with seamless transitions
- Very good stagnation behavior (models with flexible riser tube)
Technical parameters
| Model |
SSK |
| Type |
flat plate collector (vertically / horizontally) |
| Installation |
on-roof / in-roof |
| Series |
SSK21 / SSK27 |
| Gross area |
2.1 / 2.7 m² |
| Frame material |
aluminum |
| Frame design |
uncoated, alternatively anodized |
| Back plate |
aluminum stucco 0.4 mm |
| Thermal insulation |
rock wool, 50 mm thick |
| Efficiency eta0 |
75 - 81.5% |
| Tilt angle min. |
15 ° |
| Tilt angle max. |
90 ° |
| Solar glass |
float / prismatic |
| Installation profile |
98 mm |
| Weight |
42.2 kg |
|
| Coating |
highly selective vacuum sputtering |
| Connections |
2x top connections ¾" female thread
4x side connections ¾" female thread
4x side connections Cu 18 |
All solar collectors from Sun Master are characterized by continuous process improvement and the highest quality standards. For more information about our aluminum frame collectors, please contact us or arrange a no-obligation consultation.
Aluminum tray collector SWK
Flat plate solar collector: the universal on-roof collector
Sun Master’s aluminum tray collector SWK is very weather resistant and durable. Thanks to the well protected heat carrier, the solar tray collector is a particularly good heat carrier that experiences no thermal dilatation problems. Seamless transitions between the individual flat panel solar collectors guarantee high levels of efficiency.
Product features
- Deep drawn aluminum tray and anodized cover system for weather resistance and durability
- Flexible riser tube for good stagnation behaviour, protection of the heat carrier, low pressure losses and no thermal dilatation problems
- Highly transparent solar safety glass
- Optimized flashing system for in-roof installation
Technical parameters
| Model |
SWK |
| Type |
flat plate collector (vertically / horizontally) |
| Installation |
on-roof / in-roof |
| Series |
SWK25 |
| Gross area |
2.55 m² |
| Frame material |
aluminum |
| Frame design |
anodized front COO or C33 |
| Back plate |
aluminum tray 0.8 mm |
| Thermal insulation |
rock wool, 60 mm thick |
| Efficiency eta0 |
76.6 – 77.1% |
| Tilt angle min. |
15 ° |
| Tilt angle max. |
70 ° |
| Solar glass |
float / prismatic |
| Installation profile |
107 mm |
| Weight |
42 kg |
|
| Coating |
highly selective vacuum sputtering |
| Connections |
2 x side connections ¾" female thread / male thread |
All solar collectors from Sun Master are characterized by continuous process improvement and the highest quality standards. For more information about our aluminum tray collectors, please contact us or arrange a no-obligation consultation.
Wooden frame collector SIC
Solar panels: the super-flat in-roof collector
Sun Master’s wooden frame collector SIC is, thanks to its low weight and an extremely low installation profile, perfect for use on roofs and facades. Seamless transitions between the individual solar panels guarantee high levels of efficiency.
Product features
- Thanks to the low installation profile, the upper flashing becomes thin and the roof area is optimally used
- Flexible riser tube for good stagnation behavior, protection of the heat carrier, low pressure losses and no thermal dilatation problems
- Flashing for different roof types available
- Highly transparent solar safety glass
Technical parameters
| Model |
SIC |
| Type |
flat plate collector (vertically) |
| Installation |
in-roof |
| Series |
SIC11 / SIC21 |
| Gross area |
1.1 / 2.1 m² |
| Frame material |
spruce wood |
| Back plate |
MDF |
| Glazing bars |
uncoated aluminum + powder coated |
| Thermal insulation |
rock wool, 30 mm thick |
| Efficiency eta0 |
76.8 / 78.5% |
| Tilt angle min. |
16 ° |
| Tilt angle max. |
90 ° |
| Max. snow load |
600 kg/m² |
| Solar glass |
float |
| Installation profile |
92 mm |
| Weight |
45 kg |
|
| Coating |
highly selective vacuum sputtering |
| Connectios |
2x top connections Cu 18 |
All solar panels from Sun Master are characterized by continuous process improvement and the highest quality standards. For more information about our wooden frame collectors, please contact us or arrange a no-obligation consultation.
Wooden frame collector SMK
Solar panels: The modular in-roof collector
Sun Master’s wooden frame collector SMK is, despite its low weight, extremely robust and can be modularly mounted on the roof or the facade using a tried and tested installation method. Seamless transitions between the individual solar panels guarantee high levels of efficiency.
Also available as a wooden crane collector SMK. It is encased in weather-resistant sheet metal (available as an accessory). This allows multiple crane assemblies per day.
Product features
- Harmonious and uniform collector field - seamless transitions between the individual solar panels
- Flashing for different roof types available
- Highly transparent solar safety glass
- Modular, also available as large-scale module
Technical parameters
| Model |
SMK |
| Type |
flat plate collector (verically) |
| Installation |
in-roof |
| Series |
SMK11 / SMK12 |
| Gross area |
1.1 / 2.1 / 4.1 / 6.1 / 8.1 / 10.1 m² |
| Frame material |
spruce wood |
| Back plate |
MDF |
| Glazing bars |
aluminum bronze C32 |
| Thermal insulation |
rock wool, 50 mm thick |
| Efficiency eta0 |
> 75% |
| Tilt angle min. |
20° |
| Tilt angle max. |
90° |
| Max. snow load |
600 kg / m² |
| Solar glass |
float |
| Installation profile |
105 mm |
| Weight |
45 kg |
|
| Coating |
highly selective vacuum sputtering |
| Connections |
2x top connections Cu 18 |
All solar panels from Sun Master are characterized by continuous process improvement and the highest quality standards. For more information about our wooden frame collectors, please contact us or arrange a no-obligation consultation.
